Invoices, estimates and receipts in minutes

Pro Pro is active in this browser. Open your Pro accountPro free trial is active. Open your Pro accountPro is active but will not renew. Open your Pro account

Roofing Estimate Template

Pick the roofing work, enter your prices and get an estimate PDF with a validity date and a block for the customer to sign.

Example: Roofing Estimate Template with the default input (Estimate number: EST-0001, Date: 2026-01-15, Valid for14 days30 days60 days90 days: 30 days). The live tool loads here.

Add a line with a price to see the totals.

Made on your device. Nothing is uploaded and there is no sign-up.

Free · runs in your browser · nothing is uploaded

Open on InvoicePlank

This embed was switched off for this website. Open on InvoicePlank

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

This is a free roofing estimate template: no sign-up, nothing uploaded, PDF download. Use it to price a roof job before any work starts. Pick roofing lines such as tear-off, shingles, flashing and repairs from the trade list, type your own prices, and set the sales tax percent for your area. Choose how many days the estimate stays valid, then download a PDF or print it for the homeowner.

This page runs on the same engine as the InvoicePlank app. In the app, a signed roofing estimate can become a saved job with a deposit, change orders for hidden decking damage, and payments logged as they arrive. Use the page for the written proposal, and open the app when the roof work begins.

How to make an estimate

  1. Enter your business name, address, phone, email and your roofing contractor licence number.
  2. Enter the customer and the job address.
  3. Pick a line from the list and choose Add line. Repeat for each item of the job.
  4. Set the quantity and your price on each line. Change the wording of any line you like.
  5. Enter the sales tax percent if it applies. If you ask for money to start, enter the deposit as a percent of the total.
  6. Choose how long the estimate stays valid: 14, 30, 60 or 90 days.
  7. Check the total, then choose Download PDF or Print. The PDF has a name, signature and date block for the customer.

What to check on an estimate

  • Your business name, phone number, email and roofing contractor license number, shown where your area requires one.
  • The property address and the roof type, such as asphalt shingle, metal or flat roof.
  • A scope line for each phase: tear-off, underlayment, shingles, drip edge and flashing.
  • Quantities for each line with the unit named, such as squares of roofing, linear feet of edge, or each vent or pipe boot.
  • The subtotal, sales tax, total, the valid-until date, and a block where the customer signs and dates the PDF.

Everything is worked out on your device as you type, so you can change a quantity or a price and see the new total at once.

Measuring the roof before you price it

Prices are yours to enter; the page shows no price ranges. Last checked 2026-11-13.

A roof price starts with the numbers. Many roofers count shingles in squares, where one square covers 100 square feet of roof surface. Measure each roof plane, note the pitch, and add an allowance for waste from cuts and valleys. Write the squares on the line itself, not a rough guess for the whole house. Steep roofs take more time and more safety gear, so note the pitch on the estimate too. A homeowner who sees the measurements can check the work against the house.

Tear-off, decking and damage you cannot see

The first estimate often misses what the crew finds under the old shingles. Say so in plain words. Put tear-off and disposal on one line, and put replacing rotten decking on a separate line with a unit price per sheet. Tell the customer that decking is replaced only when it is found damaged and approved, and that the total may change because of it. If the old roof has more than one layer, say how many layers you expect to remove, because that changes the disposal line. That way the customer knows the number is a starting point.

Flashing, vents and the small parts people forget

Flashing, pipe boots, skylights and chimney work add cost quickly. List each one on its own line with a count. Three pipe boots read more clearly than one lump sum for roof penetrations. Also list the underlayment, starter strip and drip edge. Gutters and fascia are often damaged in the same visit, so price them on their own lines and let the homeowner choose to skip them. If the job needs a permit, add a line for the permit fee and say who applies for it. Check the rules of your state or local licensing board for permit requirements before you set a start date.

Warranty, validity and signing the estimate

Name the shingle product and the warranty you plan to use, in plain words. Roofing prices can move with material supply, so choose a validity period that fits the season, anywhere from 14 to 90 days. Tell the customer that a price after the date needs a new estimate. The customer signs and dates the block on the PDF when they accept, and you keep that signed copy with the job papers. If the homeowner later wants a longer warranty or a different shingle, that is a change to the scope and belongs on a new estimate.

Roof size and shingle quantity calculator

Work out the roof surface from the footprint and the pitch, then add the shingle bundles and the labor to the estimate above. You type every price.

Frequently asked questions

Should a roofing estimate ask for a deposit?

It is up to you. Some roofers ask for a deposit before they order materials. Set the deposit as a percent of the total, and the PDF shows the amount due to start the job.

How long should a roof estimate stay valid?

The page lets you choose from 14 to 90 days. Pick a shorter time when shingle or metal prices are moving quickly. Pick a longer time when the homeowner needs to talk with a lender or a spouse first.

Can I use this for a roof repair instead of a full replacement?

Yes. Pick the repair lines, such as flashing, a few shingles or a leak fix. Type the labor and material prices for that visit, then download the PDF or print it.

Can I change the lines from the list?

Yes. Every name, quantity and price can be edited, and a blank line is one click away.

Does the list include prices?

No. Prices differ by city, supplier and job, so you enter your own.

Is anything uploaded?

No. The estimate is made in your browser and the file is built on your device. Your business details stay in this browser only, so the next document starts filled in.

Do I need to create an account?

No. There is no sign-up and no email form.

Is it free?

Yes, with no sign-up and no limit on how many you make. The InvoicePlank app turns an accepted estimate into a deposit and an invoice on the same job.