Invoices, estimates and receipts in minutes

Pro Pro is active in this browser. Open your Pro accountPro free trial is active. Open your Pro accountPro is active but will not renew. Open your Pro account

Plumbing Estimate Template

Pick the plumbing work, enter your prices and get an estimate PDF with a validity date and a block for the customer to sign.

Example: Plumbing Estimate Template with the default input (Estimate number: EST-0001, Date: 2026-01-15, Valid for14 days30 days60 days90 days: 30 days). The live tool loads here.

Add a line with a price to see the totals.

Made on your device. Nothing is uploaded and there is no sign-up.

Free · runs in your browser · nothing is uploaded

Open on InvoicePlank

This embed was switched off for this website. Open on InvoicePlank

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

Use this plumbing estimate template to price drain clearing, fixture swaps, water heater work and pipe repairs. Pick plumbing lines from the trade list, type your own prices, and set the sales tax percent for your area. Choose how many days the estimate stays valid, then download a PDF or print it for the homeowner.

Under the hood, this page is the same engine that InvoicePlank’s app uses. The app can take an accepted plumbing estimate and add a deposit for parts, track change orders when the pipes turn out worse than expected, and record each payment on one job. Use this page when you only need the written estimate for today.

How to make an estimate

  1. Enter your business name, address, phone, email and your plumber licence number.
  2. Enter the customer and the job address.
  3. Pick a line from the list and choose Add line. Repeat for each item of the job.
  4. Set the quantity and your price on each line. Change the wording of any line you like.
  5. Enter the sales tax percent if it applies. If you ask for money to start, enter the deposit as a percent of the total.
  6. Choose how long the estimate stays valid: 14, 30, 60 or 90 days.
  7. Check the total, then choose Download PDF or Print. The PDF has a name, signature and date block for the customer.

What to check on an estimate

  • Your business name, phone, email and your plumber license number, shown where your area needs it.
  • The service address and the fixture or area involved, such as the hall bath or the water heater closet.
  • Labor by task, such as a diagnosis visit, a drain clear or a fixture swap.
  • Parts listed by name and quantity, such as a shutoff valve, a wax ring or a water heater element.
  • The subtotal, sales tax, total, the valid-until date, and a signature block for the homeowner.

Everything is worked out on your device as you type, so you can change a quantity or a price and see the new total at once.

Diagnosis visits and flat-rate tasks

Many plumbing calls start with a look at the problem before anything is fixed. Put that visit on its own line, so the homeowner sees what they pay for even if the repair turns out to be a different job. For common tasks, such as clearing a drain or replacing a faucet, you can write one flat price for the whole task. State what the flat price includes, such as the trip, the tools and the cleanup. Note any task that will need a second visit, so the homeowner is not surprised by a return trip.

Two fixture options on one estimate

Homeowners often pick a fixture by look or by cost, so give them a clear choice. Write two options as two short sections, such as a standard faucet and a higher grade faucet, each with its own part name and price. Total only the option the homeowner picks, and tell them the other option is listed for comparison. If the homeowner supplies the fixture, remove your fixture line and write a line that says so. Confirm the fixture fits the existing rough-in before anything is ordered.

Water heaters, leaks and hidden damage

Water heaters, slab leaks and rotten subfloor are hard to price until the wall or floor is open. Price the work you can see first. Then add a separate line for possible repairs at a stated labor rate, with a note that the homeowner approves that work before the crew continues. For gas line work or any job that needs a permit, check the rules of your state or local licensing board before you set a date. Some of that work may need a licensed trade to do it.

Water shutoffs, parts prices and the signed page

Tell the homeowner when the water will be off and for how long, so they can plan for it. Note any inspection a permit requires. Parts prices change, so pick a valid-until date between 14 and 90 days out. A signed PDF from the homeowner shows that the price and the scope were agreed. Store the signed estimate with the job record, so the parts you ordered can be matched to it later.

Frequently asked questions

Should I add a trip fee to the estimate?

You can add a line for a service call or a trip. Type the amount you choose and label the line so the homeowner knows what it covers. The page does not add a trip fee on its own.

How do I show parts I order after the estimate?

Keep each part on its own line with its quantity and the price you charge. If the parts change after the homeowner signs, write a change order. Get the homeowner’s signature before you order the new parts.

Can I use this for an emergency leak call?

Yes. Write the emergency visit as a line, add the parts you expect, and use a shorter valid-until date. Keep the estimate brief so the homeowner can read it quickly in a stressful moment.

Can I change the lines from the list?

Yes. Every name, quantity and price can be edited, and a blank line is one click away.

Does the list include prices?

No. Prices differ by city, supplier and job, so you enter your own.

Is anything uploaded?

No. The estimate is made in your browser and the file is built on your device. Your business details stay in this browser only, so the next document starts filled in.

Do I need to create an account?

No. There is no sign-up and no email form.

Is it free?

Yes, with no sign-up and no limit on how many you make. The InvoicePlank app turns an accepted estimate into a deposit and an invoice on the same job.