Invoices, estimates and receipts in minutes

Pro Pro is active in this browser. Open your Pro accountPro free trial is active. Open your Pro accountPro is active but will not renew. Open your Pro account

Electrical Estimate Template

Pick the electrical work, enter your prices and get an estimate PDF with a validity date and a block for the customer to sign.

Example: Electrical Estimate Template with the default input (Estimate number: EST-0001, Date: 2026-01-15, Valid for14 days30 days60 days90 days: 30 days). The live tool loads here.

Add a line with a price to see the totals.

Made on your device. Nothing is uploaded and there is no sign-up.

Free · runs in your browser · nothing is uploaded

Open on InvoicePlank

This embed was switched off for this website. Open on InvoicePlank

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

Use this electrical estimate template to price wiring, fixture, panel and repair work. Pick electrical lines from the trade list, type your own labor and material prices, and set the sales tax percent for your area. Choose how many days the estimate stays valid, then download a PDF or print it for the customer.

This page runs on the engine that powers the InvoicePlank app. When the customer says yes, the app can turn the estimate into a saved job with a deposit, change orders for problems found behind the walls, and payment tracking. Stop at the printed estimate, or carry the same numbers into the app for the whole job.

How to make an estimate

  1. Enter your business name, address, phone, email and your electrician licence number.
  2. Enter the customer and the job address.
  3. Pick a line from the list and choose Add line. Repeat for each item of the job.
  4. Set the quantity and your price on each line. Change the wording of any line you like.
  5. Enter the sales tax percent if it applies. If you ask for money to start, enter the deposit as a percent of the total.
  6. Choose how long the estimate stays valid: 14, 30, 60 or 90 days.
  7. Check the total, then choose Download PDF or Print. The PDF has a name, signature and date block for the customer.

What to check on an estimate

  • Your business name, phone and email, plus your electrician license number where your area requires it.
  • The property address and whether the work is residential or commercial.
  • One line for each task, such as a new 20 amp circuit, a GFCI outlet or a ceiling fan swap, with the count.
  • Materials listed by type and quantity, such as cable by the foot, boxes, breakers and devices.
  • The subtotal, permit and inspection lines, sales tax, total, the valid-until date, and a signature block.

Everything is worked out on your device as you type, so you can change a quantity or a price and see the new total at once.

Writing the scope as separate tasks

Electrical quotes go wrong when the task is vague. Write what you will do in plain terms, such as replace one switch, add two recessed lights, or run a new line from the panel to a garage. Give the count for each item. Note the access you need, such as an attic crawl space or a finished ceiling you will have to open. The customer should be able to read each line and know what is included without asking you what it means.

Permits, inspections and code questions

Some electrical work needs a permit and an inspection before the wall is closed. Add the permit fee on its own line, and state who will pull the permit. Do not promise a finish date that depends on an inspector’s schedule. Whether a job needs a permit, and who may do it, depends on where the work is. Check the rules of your state or local licensing board before you write the scope, and say on the estimate that the final scope follows that check.

Panels, old wiring and the parts that hide

Panel upgrades, old wiring and damaged boxes often show up only after the walls are opened. Price the known work first. Then add a separate section for possible repairs at a stated labor rate or as a per-part price. Describe what the rate covers, so the customer knows what happens if the wiring is worse than expected. Name the cable type and the gauge wherever the choice matters, because the customer may ask why one run costs more than another.

Power shutoffs, dates and acceptance

Tell the customer when the power will be off, how long it will be off, and how you will warn them beforehand. Pick a valid-until date between 14 and 90 days out, because equipment and copper costs can move. The client signs and dates the PDF to accept the work. Keep that signed copy with the job records, because the same figures will be needed when you bill the job later.

Frequently asked questions

Should the permit go on its own line?

Yes. Put the permit fee on its own line, so the customer can see it apart from your labor. Note who applies for the permit. The rules on who may pull a permit depend on your area.

Can I quote a repair by the hour?

Yes. Pick a labor line and type your hourly rate, then enter the number of hours you expect. Add a note that any extra hours will be billed only after the customer agrees to them.

What if I find more wiring problems after I start?

Stop and call the customer before you do more work. Write the extra repair as a change order with its own lines and total, and get the signature first. Keep the change order with the original estimate.

Can I change the lines from the list?

Yes. Every name, quantity and price can be edited, and a blank line is one click away.

Does the list include prices?

No. Prices differ by city, supplier and job, so you enter your own.

Is anything uploaded?

No. The estimate is made in your browser and the file is built on your device. Your business details stay in this browser only, so the next document starts filled in.

Do I need to create an account?

No. There is no sign-up and no email form.

Is it free?

Yes, with no sign-up and no limit on how many you make. The InvoicePlank app turns an accepted estimate into a deposit and an invoice on the same job.